Orifice Style Flowbench for sale

Post Reply
kanfoush
Posts: 2
Joined: Tue Apr 10, 2012 6:16 pm

Orifice Style Flowbench for sale

Post by kanfoush »

I have a flowbench I built from the Mercdog plans several years ago. I modified the plans and changed the rotating orifice plate to o-ringed orifice inserts. Made the bench very repeatable. I am sure it could be modified back to the original design if desired.

This flowbench has 6 blowers in it and I have a couple more spares. Machined aluminum inclined manometer from Mercdog. Includes an adapter on it to bolt up Ford 2.3 OHC heads and that is all I ever flowed on it. Easily flows to 145 CFM@ 28 Inches and I am sure will do much more with bigger heads. I built in space for another blower or two but didn't put them in.

I am located in Niagara Falls, NY.

$150 or reasonable offer.

I can send some pics, just e-mail me at dankanfoush@yahoo.com

Thanks.

Dan
Post Reply