Calculations Shop DIY

Place to add formulas. If you post a formula please make sure your abbreviations are spelled out so it avoids a lot of follow-up postings. I know a lot of abbreviations are common or taken to be common knowledge. Please be sure to checkout the new FAQ of common abbreviations.

Please post formulas in separate topics, do not add formulas to someone else's post unless it relates to the original post. Also in the topic line make a note of what your posted formula is about . Thanks
Post Reply
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Calculations Shop DIY

Post by Hotz »

calculate rotations & diameters of pulleys

by Hotz ;)
You do not have the required permissions to view the files attached to this post.
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: Calculations Shop DIY

Post by Hotz »

Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: Calculations Shop DIY

Post by Hotz »

United Engine & Machine Piston Calculators. ;)

http://www.kb-silvolite.com/calc.php
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
Post Reply