Weather Corrected Data using Orifice Plate Cd-Orifice size-

Discussion on general flowbench design
Post Reply
Tom Vaught
Posts: 29
Joined: Fri Apr 30, 2010 12:06 pm

Weather Corrected Data using Orifice Plate Cd-Orifice size-

Post by Tom Vaught »

Used the existing Excel calculator for years to calculate flow vs orifice size and Cd.

I came up with a modified spreadsheet that will allow changing the assumed Air Density
(Inputting Actual Test Conditions) in the calculation vs using the current one in the program.

Where do I send the Spreadsheet (by e-mail) to get it posted for member use?

Tom Vaught
jfholm
Posts: 1628
Joined: Fri Feb 19, 2010 7:36 pm
Location: Grantsville, Utah 45 min west of Salt Lake City

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by jfholm »

Tom,
At the bottom just below where you post your message here you will see on the left where it says filename. To the right of that it says browse, click on that and just find where your file is and click add file and then it will show up. If You have trouble I will do a PM and send you my email address and I will do it for you :D

John
86rocco
Posts: 292
Joined: Thu Mar 04, 2010 9:01 pm

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by 86rocco »

You don't have to email it o anyone, you can attach to a post here.Click on "Post Reply" scroll down to "Browse", click on it then navigate to the location of the spreadsheet, click on "Open", then click on "Add the file", wait a few seconds for the file to upload, then click on "Submit"
attach file.JPG
You do not have the required permissions to view the files attached to this post.
jfholm
Posts: 1628
Joined: Fri Feb 19, 2010 7:36 pm
Location: Grantsville, Utah 45 min west of Salt Lake City

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by jfholm »

First let me tell Tom Vaught thanks for this spreadsheet for us. He sent it to me and I will post it here.

John
You do not have the required permissions to view the files attached to this post.
Malvin
Posts: 451
Joined: Sat Feb 27, 2010 12:50 am
Location: Pennsylvania

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by Malvin »

Thanks Tom Vaught for sharing :)

Thanks John for posting it
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by Hotz »

Image
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
RACEPUMPER
Posts: 447
Joined: Wed Aug 25, 2010 7:54 am
Location: Riverina Australia

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by RACEPUMPER »

There's that like button Hotz,
I want one too
Jim
I really love making stuff but don't finish much
Tom Vaught
Posts: 29
Joined: Fri Apr 30, 2010 12:06 pm

Re: Weather Corrected Data using Orifice Plate Cd-Orifice si

Post by Tom Vaught »

Thanks for the LIKE IMAGE. Makes it all worthwhile.

TV

The other info on the spreadsheet was just some documentation on some different benches over the years and checking the average Discharge Co-efficients from the data.

Blow it away if you want.
Post Reply