yep another FNG.

Discussion on general flowbench design
Post Reply
Mad Machinist
Posts: 1
Joined: Wed Sep 30, 2015 8:09 pm

yep another FNG.

Post by Mad Machinist »

Found this site and plan on sticking around for awhile.

As you can tell by my user handle I am a machinist/millwright and have been for longer than I care to admit. My experience is pretty broad from everyday household fixes to repairing critical equipment in nuclear powerhouses. But the main reason for being here is to build a flowbench to get back into playing with bikes and four wheeler's like I used to.

Hopefully I will have so good input here.

Mike
Tony
Posts: 1438
Joined: Wed Mar 03, 2010 3:40 pm
Location: Melbourne, Australia

Re: yep another FNG.

Post by Tony »

Welcome to the Forum Mike.

You are definitely among like minded people here, we even have a few odd crazy biker guys here.
Plenty to talk about and share, this must be about the most friendly site anywhere on the Internet.
Also known as the infamous "Warpspeed" on some other Forums.
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: yep another FNG.

Post by Brucepts »

Tony wrote:Welcome to the Forum Mike.

You are definitely among like minded people here, we even have a few odd crazy biker guys here.
Plenty to talk about and share, this must be about the most friendly site anywhere on the Internet.
What Tony said
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: yep another FNG.

Post by Hotz »

Hello Mike ..
Welcome, nice to have another guy motorcycles here .. A lot of good this forum for a guy DIY Flow Bench.
Summing up the best place .. :D
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
RACEPUMPER
Posts: 447
Joined: Wed Aug 25, 2010 7:54 am
Location: Riverina Australia

Re: yep another FNG.

Post by RACEPUMPER »

Welcome Mike.

Jim
I really love making stuff but don't finish much
Post Reply