tvr plenum testing

Discussion on general flowbench design
ivanhoew
Posts: 954
Joined: Wed Feb 16, 2011 5:12 am
Location: oxford ,england .

Re: tvr plenum testing

Post by ivanhoew »

so while i waited for the cave floor to dry i got flangey wiv it.



firstly i ported out the turbine inlet..


Image





Image



then got some old manky flame cut 1/2 " plate ..


Image



made the adaptor plate from turbo to 4"downpipe.

Image


and the huge holset hc3 flange to the t3 flange adaptor cut out .

Image



then sanded and spiffed up the housing .


Image


Image

regards
robert
medusa assembled..first drive
https://www.youtube.com/watch?v=zKMvQQm7Cn4&t=5s
ivanhoew
Posts: 954
Joined: Wed Feb 16, 2011 5:12 am
Location: oxford ,england .

Re: tvr plenum testing

Post by ivanhoew »

https://youtu.be/igkbS-RUBzk


little video i made of the fb testing.
medusa assembled..first drive
https://www.youtube.com/watch?v=zKMvQQm7Cn4&t=5s
ivanhoew
Posts: 954
Joined: Wed Feb 16, 2011 5:12 am
Location: oxford ,england .

Re: tvr plenum testing

Post by ivanhoew »

medusa assembled..first drive
https://www.youtube.com/watch?v=zKMvQQm7Cn4&t=5s
Post Reply