Page 2 of 2

Re: Average flow loss

Posted: Mon Nov 28, 2016 9:55 am
by RACEPUMPER
Another consideration to think about Ron, If you use 12 of the LH2093-240, your total flow in a bench with a 16" rise would be only be 100-120 cfm @ 100".

Jim

Re: Average flow loss

Posted: Thu Mar 16, 2017 12:06 am
by ronm
My posts don't always work. I will probably never test over 44" but I will be using some steel bracing in certain locations. Working on the slider assembly and motor mounts and motor plate.