HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Discussion on general flowbench design
Post Reply
Tom Vaught
Posts: 29
Joined: Fri Apr 30, 2010 12:06 pm

HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Post by Tom Vaught »

HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

I am retiring after 39 years from the Ford Motor Company so no more "playing" on the company flow bench equipment (;.(

I will still post on the board occasionally in my retirement. Time to build my own "latest and greatest" bench.

Post up some ideas on your thoughts for this thing.

I already have the Vacuum Motors and some of the support parts" Merrium manometers, etc.

Tom V.
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Post by Hotz »

Merry Christmas to all, May the true Christmas spirit be in your hearts.
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
86rocco
Posts: 292
Joined: Thu Mar 04, 2010 9:01 pm

Re: HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Post by 86rocco »

Congratulations on your retirement Tom!

Happy holidays to one and all.
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Post by Brucepts »

Congrats on retirement!

Happy Thanksgiving and Merry Christmas!

Lots of good info on the forum about building a flowbench ;) :mrgreen: :D
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
ivanhoew
Posts: 954
Joined: Wed Feb 16, 2011 5:12 am
Location: oxford ,england .

Re: HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Post by ivanhoew »

well done Tom , look forward to your input . :)
medusa assembled..first drive
https://www.youtube.com/watch?v=zKMvQQm7Cn4&t=5s
RACEPUMPER
Posts: 447
Joined: Wed Aug 25, 2010 7:54 am
Location: Riverina Australia

Re: HAPPY THANKSGIVING AND A MERRY CHRISTMAS TO MY FRIENDS

Post by RACEPUMPER »

Congratulations on your retirement Tom, I'm sure you will keep busy.
Tom Vaught wrote:
Time to build my own "latest and greatest" bench.

Post up some ideas on your thoughts for this thing.

I already have the Vacuum Motors and some of the support parts" Merrium manometers, etc.

Tom V.
Ideas and thoughts? Whats the budget? :mrgreen:

Jim
I really love making stuff but don't finish much
Post Reply