Help Kick-Start PTS's projects

Mission Statement: The PTS Flowbench Forum is a community of dedicated members who share the common belief in promoting with a spirit of camaraderie and mutual respect for other members any and all discussion on any type of flowbench, not specifically PTS style flowbenches/parts.

The number one priority and commitment is to promote, at all times, a world class forum which enables it's membership to build a long-term relationship with each member and welcome members to participate no matter what your level of knowledge to help increase the collective knowledge base of the PTS Flowbench Forum.

Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: Help Kick-Start PTS's projects

Post by Brucepts »

DaveMcLain wrote:Revison 3 dot com has a show that's all about producing your own films, special effects etc but I think they also cover rather basic stuff such as camera techniques and equipment. It's called "Film Riot", check it and it's related forum out for some possibly helpful info.
So while you all are learning about flowbenches reading my forum, I can go to someone else's forum and learn Cinematography! :D

Thanks checking it out . . .
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Darcy R
Posts: 63
Joined: Tue Aug 07, 2012 3:27 am

Re: Help Kick-Start PTS's projects

Post by Darcy R »

1960FL wrote: Just like Public Television I am making an offer to all the members… Between August 4, 2012 and September 4, 2012 For the first 10 (Ten) members to make a Donation to Bruce’s cause of $100.00 US Dollars, I will match your donation and recognize you here on this post. If Bruce wants to send you gift, that is up to him.

So for now rather than run my mouth more I have covered the first match and am waiting for your PM to match the other 9.

Thanks to you all for supporting Bruce.

Rick


Rick, I found this forum last week, and have very much enjoyed all of the reading since becoming a member. Today I made a $100 donation to Bruce.
I'm also making plans for Bruce to seee me all of the parts for a 8 motor bench.
Thanks to all for the great information sharing.

Darcy
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Help Kick-Start PTS's projects

Post by 1960FL »

Darcy,

Thanks for the support and your match hase been placed in your name.


Can't thank you all enough.

Rick

4 more to go :-)
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Help Kick-Start PTS's projects

Post by 1960FL »

Pushrod,

Robert, thanks for your donation all the way fromt he UK,

I did the match,

3 to go!

Rick
Last edited by Brucepts on Tue Aug 14, 2012 7:09 pm, edited 1 time in total.
Reason: Spelling error :)
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: Help Kick-Start PTS's projects

Post by Brucepts »

Just a little update on my progress; This past week I purchased a camcorder and tripod unit so, I hope to be able to make some quality videos in the very near future showing off the PTS Style flowbench along with the parts I supply.

Will also be doing some instructional videos as I go along on how things/parts operate to increase the knowledge for the people just getting started in flowbenching!

I'm looking into getting PTS merchandise (hats shirts etc) at some point over the next few months. I know I've mentioned this many many times before but it looks like it's going to happen this time!

Thanks to everyone who made the generous donations that are helping me "Kick-Start" PTS to a new level and allowing me to keep prices at the same level!

Opps . . . . almost forgot to say thanks to the individuals that offered me advice also which is just as important as $$$'s
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Help Kick-Start PTS's projects

Post by 1960FL »

Just a thank you to Tom (200CFM) for making a great donation
I did my part.


Thanks again to you all,

2 to go.

Rick
Greg Long
Posts: 31
Joined: Sat Apr 03, 2010 10:58 am

Re: Help Kick-Start PTS's projects

Post by Greg Long »

Rick, i just wanted to say THANKS to for your donations in this project. It is great that you would match the donations as you have. I also want to thank everyone who has donated at any level, this will help Bruce to go farther and do more for us and PTS.
I normally don't post due to my poor computer and typing skills, on a scale of 1 to 10 both would be a negative number, but I think this idea is important enough to take a shot.
Every one of us, from the beginner to the pros who has ever had a question answered or a problem solved is indebted to Bruce for providing this forum. If all this information could be contained in a book, think of how valuable that would be, but it is here, free, thanks to Bruce. I truly appericiate all he has done and with more donations think what more he can do, so come on, pitch in anything you can, it will be worth it. This WAS NOT a paid political advertisement, but I'm Greg and I do endorse it.
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Help Kick-Start PTS's projects

Post by Flash »

Can't wait to see the videos!
Donation sent.

Thanks to every one, That makes PTS such a grate sight!!!

And Thank You Rick for throwing up the challenge ;)
Gordon
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Help Kick-Start PTS's projects

Post by 1960FL »

Gordon, thanks for the help, i did my part.

NOW JUST ONE TO GO!

Thank you all.

Rick
Jginger
Posts: 1
Joined: Fri Jun 11, 2010 10:00 pm

Re: Help Kick-Start PTS's projects

Post by Jginger »

I have a video camera I will donate, not the latest greatest.
but you are welcome to have it.
Bruce, send me your addres, you can thank me later w/ some dvds
Jonas
Locked