Signed up for the new forum

Discussion on general flowbench design
Post Reply
Tom Vaught
Posts: 29
Joined: Fri Apr 30, 2010 12:06 pm

Signed up for the new forum

Post by Tom Vaught »

Anyone still using the old forum except for reference?

Tom Vaught
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: Signed up for the new forum

Post by Brucepts »

What took you so long??? LOL

The old forum is going to become reference/read-only as soon as I figureout how best to do it.

Prefer to have any new posts/replies started here.
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Signed up for the new forum

Post by Flash »

Thought it was set to read only............when over there and noticed there was a couple posts. :?
Gordon
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Signed up for the new forum

Post by Flash »

Brucepts wrote:What took you so long??? LOL

The old forum is going to become reference/read-only as soon as I figureout how best to do it.

Prefer to have any new posts/replies started here.
Maybe when you change it to read only, you can add a message to whom ever trys to post up, This address and an explanation of how to get here and re sign up.
Gordon
S.Brown
Posts: 1
Joined: Wed Jul 21, 2010 11:19 pm

Re: Signed up for the new forum

Post by S.Brown »

Tom Vaught wrote:Anyone still using the old forum except for reference?

Tom Vaught
This wouldn't happen to be the Tom Vaught from Westland Michigan, would it?
I believe it was Oakwood Lane, back in the day?
putlove
Posts: 5
Joined: Sat Sep 11, 2010 5:26 pm

Re: Signed up for the new forum

Post by putlove »

Im new to this forum today. I was reading about the orfice plate that was sent to other flowbench owners. Could i buy a set of those plates to check my machine? I have a 17 inch stainless disc turn around in my machine im building right now. I had merriam instruments help me with calibration. They sent me a full print out for all the flow ranges i wanted. I would really like to compare my numbers with you guys when its running. Thanks,jim
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: Signed up for the new forum

Post by Brucepts »

putlove wrote:Im new to this forum today. I was reading about the orfice plate that was sent to other flowbench owners. Could i buy a set of those plates to check my machine? I have a 17 inch stainless disc turn around in my machine im building right now. I had merriam instruments help me with calibration. They sent me a full print out for all the flow ranges i wanted. I would really like to compare my numbers with you guys when its running. Thanks,jim
Welcome to the forum! You can find parts here:

http://www.flowbenchtech.com/flowbenchparts.html
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Post Reply