It is currently Mon Nov 20, 2017 8:46 pm



Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3, 4  Next
 First time member?? 
Author Message

Joined: Thu Feb 23, 2017 11:11 am
Posts: 1
I just found this forum today,joined immediately. While a have a flowbench already, I look forward to learning mucho.


Thu Feb 23, 2017 1:30 pm
Profile

Joined: Wed Mar 03, 2010 3:40 pm
Posts: 1271
Location: Melbourne, Australia
Welcome to the friendliest Forum on the internet Bill.

_________________
Also known as the infamous "Warpspeed" on some other Forums.


Thu Feb 23, 2017 4:32 pm
Profile

Joined: Thu Feb 09, 2017 7:55 pm
Posts: 4
Well I should have start here first.

My name is Francis, I live in Canada, Québec. I work as a welder and fabricator. I Have the habbit for trying to improve what I touch, not that I have done that much but still have fun doing it. I m on the Learning curve in of the air flow for recreational use , personal use and knowledge. I bougth the PTS blueprint from Bruce and I should start the building process once I understand well my needs and how to build the bench.

Thank you


Thu Mar 02, 2017 1:17 pm
Profile
Site Admin

Joined: Fri Jan 08, 2010 3:35 pm
Posts: 1641
Location: Pennsylvania
Francis, Welcome to the forum!

Thanks for supporting it by buying a set of plans!

_________________
Bruce

Who . . . me? I stayed at a Holiday in Express . . .

Charter Member of the "Society of Open-End Wrench Users"


Thu Mar 02, 2017 8:35 pm
Profile WWW

Joined: Sun Jan 20, 2013 7:00 pm
Posts: 4
Location: West Wales, UK
I confess to being an on/off lurker, as well as an on/off head porter, using a certain amount of DV wisdom and some "personal feel". Not very scientific I know, but I do spend loads of time on valve seats and shapes. Bought the plans some time ago, but still haven't cut any mdf, just need to get some older projects out of the way before starting....


Tue Mar 07, 2017 2:29 pm
Profile

Joined: Sat Jul 01, 2017 9:56 am
Posts: 1
I've been looking here for awhile. I currently have a home built bench (I purchased) with eight motors. After using it and seeing on YT how and what the PTS benches do, well I'm going to rebuild it and set it up like a modern bench. I build custom jetski engines and I haven't run my bench for some time (such a pain to run) but I love seeing how things truly work and not just guessing. Anyways I'm very excited to get started.

Erik


Sat Jul 01, 2017 12:25 pm
Profile
Site Admin

Joined: Fri Jan 08, 2010 3:35 pm
Posts: 1641
Location: Pennsylvania
tpe wrote:
I've been looking here for awhile. I currently have a home built bench (I purchased) with eight motors. After using it and seeing on YT how and what the PTS benches do, well I'm going to rebuild it and set it up like a modern bench. I build custom jetski engines and I haven't run my bench for some time (such a pain to run) but I love seeing how things truly work and not just guessing. Anyways I'm very excited to get started.

Erik


Welcome to the forum!

Sorry I'm late replying I was away for the past week.

_________________
Bruce

Who . . . me? I stayed at a Holiday in Express . . .

Charter Member of the "Society of Open-End Wrench Users"


Mon Jul 03, 2017 4:47 pm
Profile WWW

Joined: Sun Aug 27, 2017 4:05 am
Posts: 3
HI everyone, im a owner of a motorcycle shop for the last 21 yrs, an i have SF300 flow bench, just last week i recieved a flowcom for the machine after waiting 5months to recieve it from superflow, well after hooking all up an programing it,now all it does is flash on & off ,theres nothing in the manual that explains what happened, just looking for some help or ideas whats wrong. OR ill have to call superflow tommrow. thx JIM


Sun Aug 27, 2017 11:05 am
Profile

Joined: Fri Jan 08, 2010 10:36 pm
Posts: 1148
Location: Maryland
Thanks for the Story about SF always nice to here how big blue is doing :-) As for your situation I think you are stuck call SF on Monday as i don't know od anyone active on the forum using flowcom.

What kind of motorcycles do you work on?

Rick


Sun Aug 27, 2017 11:37 am
Profile

Joined: Sun Aug 27, 2017 4:05 am
Posts: 3
Thanks Rick , I primarly work on Hds. been at it for 32yrs, 21yrs owning a shop wrenching, just a 2 man operation trying to make a living, i was hoping someone would have had this prob. yeah im starting to wonder about Big Blue, well ill call them tommrow.IF THEY ANSWER. THX for the response. Rick.


Sun Aug 27, 2017 2:26 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 35 posts ]  Go to page Previous  1, 2, 3, 4  Next

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF