Page 3 of 6

Re: First time member??

Posted: Thu Feb 23, 2017 1:30 pm
by Bill T
I just found this forum today,joined immediately. While a have a flowbench already, I look forward to learning mucho.

Re: First time member??

Posted: Thu Feb 23, 2017 4:32 pm
by Tony
Welcome to the friendliest Forum on the internet Bill.

Re: First time member??

Posted: Thu Mar 02, 2017 1:17 pm
by Daoust
Well I should have start here first.

My name is Francis, I live in Canada, Québec. I work as a welder and fabricator. I Have the habbit for trying to improve what I touch, not that I have done that much but still have fun doing it. I m on the Learning curve in of the air flow for recreational use , personal use and knowledge. I bougth the PTS blueprint from Bruce and I should start the building process once I understand well my needs and how to build the bench.

Thank you

Re: First time member??

Posted: Thu Mar 02, 2017 8:35 pm
by Brucepts
Francis, Welcome to the forum!

Thanks for supporting it by buying a set of plans!

Re: First time member??

Posted: Tue Mar 07, 2017 2:29 pm
by huw
I confess to being an on/off lurker, as well as an on/off head porter, using a certain amount of DV wisdom and some "personal feel". Not very scientific I know, but I do spend loads of time on valve seats and shapes. Bought the plans some time ago, but still haven't cut any mdf, just need to get some older projects out of the way before starting....

Re: First time member??

Posted: Sat Jul 01, 2017 12:25 pm
by tpe
I've been looking here for awhile. I currently have a home built bench (I purchased) with eight motors. After using it and seeing on YT how and what the PTS benches do, well I'm going to rebuild it and set it up like a modern bench. I build custom jetski engines and I haven't run my bench for some time (such a pain to run) but I love seeing how things truly work and not just guessing. Anyways I'm very excited to get started.

Erik

Re: First time member??

Posted: Mon Jul 03, 2017 4:47 pm
by Brucepts
tpe wrote:I've been looking here for awhile. I currently have a home built bench (I purchased) with eight motors. After using it and seeing on YT how and what the PTS benches do, well I'm going to rebuild it and set it up like a modern bench. I build custom jetski engines and I haven't run my bench for some time (such a pain to run) but I love seeing how things truly work and not just guessing. Anyways I'm very excited to get started.

Erik
Welcome to the forum!

Sorry I'm late replying I was away for the past week.

Re: First time member??

Posted: Sun Aug 27, 2017 11:05 am
by jim
HI everyone, im a owner of a motorcycle shop for the last 21 yrs, an i have SF300 flow bench, just last week i recieved a flowcom for the machine after waiting 5months to recieve it from superflow, well after hooking all up an programing it,now all it does is flash on & off ,theres nothing in the manual that explains what happened, just looking for some help or ideas whats wrong. OR ill have to call superflow tommrow. thx JIM

Re: First time member??

Posted: Sun Aug 27, 2017 11:37 am
by 1960FL
Thanks for the Story about SF always nice to here how big blue is doing :-) As for your situation I think you are stuck call SF on Monday as i don't know od anyone active on the forum using flowcom.

What kind of motorcycles do you work on?

Rick

Re: First time member??

Posted: Sun Aug 27, 2017 2:26 pm
by jim
Thanks Rick , I primarly work on Hds. been at it for 32yrs, 21yrs owning a shop wrenching, just a 2 man operation trying to make a living, i was hoping someone would have had this prob. yeah im starting to wonder about Big Blue, well ill call them tommrow.IF THEY ANSWER. THX for the response. Rick.