85" flowbench operational

Discussion on general flowbench design
Post Reply
RACEPUMPER
Posts: 447
Joined: Wed Aug 25, 2010 7:54 am
Location: Riverina Australia

85" flowbench operational

Post by RACEPUMPER »

I'm not sure if anyone is still tossing up ideas on bench design, but I for one can recommend the pts plans.
My flowbench is now working, calibrated and pulling some big numbers.
This 3 phase 12 motor bench pulls 838 cfm @ 28" and can run at 85".
It is a pts design with material and structural changes to cope with high depression.
This is the fourth bench I have constructed and by far the most accurate and consistant.

Thanks Bruce and Tony for all your help along the way.
I really love making stuff but don't finish much
Old Grey
Posts: 216
Joined: Sat Sep 18, 2010 9:38 pm
Location: Sydney, Australia

Re: 85" flowbench operational

Post by Old Grey »

Which motors are you using.
larrycavan
Posts: 235
Joined: Tue Mar 09, 2010 9:46 pm

Re: 85" flowbench operational

Post by larrycavan »

RACEPUMPER wrote:I'm not sure if anyone is still tossing up ideas on bench design, but I for one can recommend the pts plans.
My flowbench is now working, calibrated and pulling some big numbers.
This 3 phase 12 motor bench pulls 838 cfm @ 28" and can run at 85".
It is a pts design with material and structural changes to cope with high depression.
This is the fourth bench I have constructed and by far the most accurate and consistant.

Thanks Bruce and Tony for all your help along the way.
It is an impressive bench. Nice work!
Larry C

http://www.cavanaughracing.com
RACEPUMPER
Posts: 447
Joined: Wed Aug 25, 2010 7:54 am
Location: Riverina Australia

Re: 85" flowbench operational

Post by RACEPUMPER »

12 ameteks Old Grey, 9 x 119996 and 3 x 119998.
And thanks Larry.

Jim
I really love making stuff but don't finish much
brandoracing
Posts: 103
Joined: Tue Nov 12, 2013 12:48 pm
Contact:

Re: 85" flowbench operational

Post by brandoracing »

Post photo of your beast! :D
Sorry for my English!
www.brandoracing.it
Alfa Romeo 75 owner
Post Reply