It is currently Fri Oct 20, 2017 5:35 pm



Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
 stability with 40" manometer 
Author Message
Site Admin

Joined: Fri Jan 08, 2010 3:35 pm
Posts: 1623
Location: Pennsylvania
Brucepts wrote:
Can you email me a video or screen shot of the show raw values window with no airflow and the DM on?


You need to show me the "raw values" window in the video. Click the box that says "Show Raw Values" and a second window pops up. I need to see what the actual numbers are that are coming from the DM to the computer.

As for the Device communication error . . . unplug the DM USB to computer, clear the window by clicking "ok" and plug your DM back in, click start and should clear the error.

Not sure why it would trigger that error in the middle of a test though? That would usually happen if you swapped DM's as each DM has a specific code the computer installs at software registration.

_________________
Bruce

Who . . . me? I stayed at a Holiday in Express . . .

Charter Member of the "Society of Open-End Wrench Users"


Tue Jun 09, 2015 12:57 pm
Profile WWW

Joined: Fri Jan 08, 2010 10:36 pm
Posts: 1135
Location: Maryland
Also please post the COM port settings from both the configuration and the Windows device manager, the DM does not need to be connected at speeds above 14400 Kbits as the ADC processor will not run any faster than that.

Rick


Tue Jun 09, 2015 7:09 pm
Profile

Joined: Tue Nov 12, 2013 12:48 pm
Posts: 103
ahahahah sony music remove my video because violate the copyright for the song on my workshop radio!!!!!!!
They are stone cold crazy!!!!!

_________________
Sorry for my English!
www.brandoracing.it
Alfa Romeo 75 owner


Fri Jun 12, 2015 9:50 am
Profile WWW

Joined: Tue Nov 12, 2013 12:48 pm
Posts: 103
https://youtu.be/D98LZMqyJec

_________________
Sorry for my English!
www.brandoracing.it
Alfa Romeo 75 owner


Fri Jun 12, 2015 10:07 am
Profile WWW

Joined: Tue Nov 12, 2013 12:48 pm
Posts: 103
Hi man,I return to wrote here because I use more my bench and have always the same problem.
If I made 2 measure in 10 minute,I find more differences.
What I do?
I look an interest thing: If I disconnect the negative hose in PT2 port of the DM I read the number on flowsoft correctly goes to zero.
Anyone have an Idea?
I cannot work on this mode.

_________________
Sorry for my English!
www.brandoracing.it
Alfa Romeo 75 owner


Mon Oct 12, 2015 2:02 am
Profile WWW
Site Admin

Joined: Fri Jan 08, 2010 3:35 pm
Posts: 1623
Location: Pennsylvania
I replied to your PM, I was out of town for a few days and could not get back to you earlier.

_________________
Bruce

Who . . . me? I stayed at a Holiday in Express . . .

Charter Member of the "Society of Open-End Wrench Users"


Mon Oct 12, 2015 7:45 am
Profile WWW

Joined: Tue Nov 12, 2013 12:48 pm
Posts: 103
the problem on this post was automatically resolved....I do't touch nothing. Just change workshop!

_________________
Sorry for my English!
www.brandoracing.it
Alfa Romeo 75 owner


Mon May 30, 2016 11:05 am
Profile WWW

Joined: Wed Oct 07, 2015 9:08 am
Posts: 5
Location: france
change workshop? :shock:


Sun Sep 04, 2016 8:59 am
Profile

Joined: Fri Dec 25, 2015 4:16 pm
Posts: 1
brandoracing wrote:
https://www.youtube.com/watch?v=1oH8nYSt22I&feature=youtu.be

Hello brandoracing
I have the same problem. My new bench is just started up. As you describe the cfm showing from 8 to 23 cfm when the motor is turned of.

Kindly
Leif


Sat Nov 19, 2016 3:36 pm
Profile

Joined: Tue Nov 12, 2013 12:48 pm
Posts: 103
Today I ultimate another bench to a client and the same problem....about 23 cfm with motor off....but for lucky this value don't compare on the final value.
but is a very serious problem.

_________________
Sorry for my English!
www.brandoracing.it
Alfa Romeo 75 owner


Fri Aug 04, 2017 12:08 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 20 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF