Help with digital manometer

Post Reply
elutionsdesign
Posts: 6
Joined: Wed Jul 20, 2011 2:53 pm

Help with digital manometer

Post by elutionsdesign »

Having issues, sure that it's windows but I can't seem to fix it. This laptop was used for the digital manometer in the past and worked fine, now when I plug the USB in windows assigns com29 or com37 depending upon which port I use but Flowsoft only goes up to com16 so I can't get any data. Suggestions?
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: Help with digital manometer

Post by Brucepts »

I would go into the device manager and manually set the USB com port number?

I do not have a computer here with Windows 10 on it to try out sorry to say.
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
elutionsdesign
Posts: 6
Joined: Wed Jul 20, 2011 2:53 pm

Re: Help with digital manometer

Post by elutionsdesign »

What's your preferred operating system Bruce? I'm thinking I should just get a dedicated machine for the bench.
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Help with digital manometer

Post by Flash »

My dedicated computer for the software........when i get there, is going to be windows XP......unless Bruce tells me no when i get to that point. :lol:
Gordon
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: Help with digital manometer

Post by Brucepts »

It will work with anything from XP up to current Windows, as we discussed on Facebook it appears to me to be the other software you had loaded that took away all the extra com ports or set it's own port based on what was plugged in asking for a specific port setting.
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Post Reply