Page 1 of 1

PTS Automatic Depression Control (PID) remote switch?

Posted: Tue Aug 02, 2016 11:55 pm
by Brucepts
Just had a request to change the unit mounted Auto/Manual switch to a remote flowbench console switch.

I added a jack so a remote switch could be used instead of the hard-wired switch I currently use.

Think I might add this as an option or make it standard in the future, any input from those using the PID?

If you have a PID and would like to add a remote switch in-place of the unit mounted one it is very easy to do as the circuit board has a 2 pin terminal connection where the switch makes it's connection. The switch used is a SPST style.

I'll get a picture up showing this connection.

Re: PTS Automatic Depression Control (PID) remote switch?

Posted: Thu Aug 04, 2016 1:38 pm
by Hotz
This looks good ... PTS always evolving.
Any ideas for the evolution of the DM software?

Re: PTS Automatic Depression Control (PID) remote switch?

Posted: Sat Aug 06, 2016 5:24 pm
by RACEPUMPER
Sounds great Bruce!

Jim

Re: PTS Automatic Depression Control (PID) remote switch?

Posted: Thu Jan 16, 2020 4:34 pm
by tafeteacher
what plug does the jack use?
Is it like this
https://www.gettoolsdirect.com.au/accud ... 00-01.html

Re: PTS Automatic Depression Control (PID) remote switch?

Posted: Thu Jan 16, 2020 10:05 pm
by tafeteacher
Ignore my post. It's the PID, not the DM... I get confused with the acronyms...lol