Inline fuses for flow bench

Post Reply
Ryan0348
Posts: 1
Joined: Thu Nov 30, 2017 4:42 pm

Inline fuses for flow bench

Post by Ryan0348 »

Whats everyone using for inline fuses when wireing up 120 volt motors series parallel for 240 volt. Can i run just 2 fuses on each leg after the motor controller and the mani shut off but before the actual motors instead of individule fuses for each motors
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Inline fuses for flow bench

Post by 1960FL »

I use individual fuses to each set of motors rated for 20% more than max current draw.

Rick
Post Reply