PTS Flowbench build in OZ?

Flowbench Services; have a shop and want to flow parts for others? Here is a place to advertise your service.

Please your post your specific location!
Post Reply
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

PTS Flowbench build in OZ?

Post by Brucepts »

Anyone want to build a PTS Flowbench for a customer in OZ? I have someone looking for one ready to go, chance for someone to make some $$$$'s :mrgreen:

PM or Email me if you are seriously interested.

I know a few have talked about it but so far nobody has stepped up to the plate and took a swing.
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Tony
Posts: 1438
Joined: Wed Mar 03, 2010 3:40 pm
Location: Melbourne, Australia

Re: PTS Flowbench build in OZ?

Post by Tony »

I am not in a position to help, but what state is this customer located ?

Australia is 78% as large as the whole of the USA in square miles, and distances and freight costs here are significant.
Also known as the infamous "Warpspeed" on some other Forums.
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: PTS Flowbench build in OZ?

Post by Brucepts »

Vic . . . hop skip and jump North from your place actually :) Probably could go see it once it's done

It's being built or pretty near done I would hope by now, parts were sent out end of December
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: PTS Flowbench build in OZ?

Post by Brucepts »

Actually, after looking at the map of your area I have BUNCH of PTS Flowbenches in that area or being built!
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Tony
Posts: 1438
Joined: Wed Mar 03, 2010 3:40 pm
Location: Melbourne, Australia

Re: PTS Flowbench build in OZ?

Post by Tony »

Ah!
Just realised the original post is now one year old.

I know of a couple of benches being built fairly close.
They are sprouting up like mushrooms all over the World.
Also known as the infamous "Warpspeed" on some other Forums.
RACEPUMPER
Posts: 447
Joined: Wed Aug 25, 2010 7:54 am
Location: Riverina Australia

Re: PTS Flowbench build in OZ?

Post by RACEPUMPER »

It's being built or pretty near done I would hope by now, parts were sent out end of December[/quote]

Yes very close.....

Jim
I really love making stuff but don't finish much
Post Reply