Newbee

Pitot Style Bench discussions
nhrata
Posts: 14
Joined: Tue Oct 19, 2010 8:40 am

Newbee

Post by nhrata »

Just wanted to say hello . just getting started on my project .
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Newbee

Post by 1960FL »

Welcome to the Forum, Tell us about what you are planning to build.

Rick
nhrata
Posts: 14
Joined: Tue Oct 19, 2010 8:40 am

Re: Newbee

Post by nhrata »

Hey Rick I have a old home made Pitot tube bench that I just pick up a few weeks ago. But I want to make a few upgrades. First is a PTS manometer . Can someone tell me how to figure the inside area of round pipe. My pipe is 2.400 ID Thanks Tim
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Newbee

Post by 1960FL »

The fomula is Pi * (R)^2 or Pi * R Squared.

in your cas it would be 3.14159*(1.2*1.2) or 4.5239 Sq-Inchs

Rick,

At at the current time the version of FlowSoft that runs the PTS DM does not support the Pito calculations. But if you are serious about doing this you will need the 100 DM and I would be glad to write the update to support a Pito Bench.
nhrata
Posts: 14
Joined: Tue Oct 19, 2010 8:40 am

Re: Newbee

Post by nhrata »

Thanks so much Rick! I'm sure going to take you up on that offer. But I can't order a Dm til late November. I'm having a pacemaker installed on Monday so I'm not Working for a little while. But as soon as I can order I Sure will. Thanks Tim
nhrata
Posts: 14
Joined: Tue Oct 19, 2010 8:40 am

Re: Newbee

Post by nhrata »

Hello again everyone. I'm trying to figure out the math for CFM on a head i tested last week . I tested the head at 10'' . At 600 lift on the exhaust the incliened manometer reading was 2.36 with 2.400 ID pipe BP was 30.16 at 59 deg's temp thanks tim
1960FL
Posts: 1338
Joined: Fri Jan 08, 2010 10:36 pm
Location: Maryland

Re: Newbee

Post by 1960FL »

Tim, was that 2.36 of virtical rise on the incline or 2.36 on the scale at some angle?

Rick
nhrata
Posts: 14
Joined: Tue Oct 19, 2010 8:40 am

Re: Newbee

Post by nhrata »

thats the reading from my dwyer inclined manometer
nhrata
Posts: 14
Joined: Tue Oct 19, 2010 8:40 am

Re: Newbee

Post by nhrata »

I'm coming up with 160.28CFM is that right?
coulterracn
Posts: 450
Joined: Wed Feb 24, 2010 5:44 am
Location: Mississippi Gulf Coast
Contact:

Re: Newbee

Post by coulterracn »

nhrata wrote:thats the reading from my dwyer inclined manometer
You may need to change to a percent scale like I did.

Image

Image

Image

Ray
My Flowbench is better than their's
Post Reply