FP1 setup with FP2.0 tube

Pitot Style Bench discussions
Post Reply
vic_dahn
Posts: 69
Joined: Mon Jun 07, 2010 5:17 pm
Location: Gladstone MI
Contact:

FP1 setup with FP2.0 tube

Post by vic_dahn »

Could anyone help me with some commands to get a base configuration on this setup?

I will be testing around 28 but i would still like my CFM to be calculated to 28

I am currently using a FP2.0 with water manometers and it is very close every time I calibrate. I have even checked it with 10 calibrated orifice plates and it was a percent or 2 good enough for me :)

I would like to go digital but this box is like going back to stone age of PC programming, and its support docs are ....... well ....... :twisted:
vic_dahn
Posts: 69
Joined: Mon Jun 07, 2010 5:17 pm
Location: Gladstone MI
Contact:

Re: FP1 setup with FP2.0 tube

Post by vic_dahn »

got it!
Post Reply