55+ on a SBC

Orifice Style bench discussions
Post Reply
Chad Speier
Posts: 139
Joined: Mon Jul 26, 2010 7:48 pm
Contact:

55+ on a SBC

Post by Chad Speier »

Stand Back! x2 of the "standard" depression. ONLY A PTS BABY!

VFactor v3.00 at .500 and 55+.. Notice the red is the 28" number. Doesn't go down with more drop! I hurt a motor in the bench, I usually saw 65-68 at that lift. I'll get it fixed..


https://www.facebook.com/video.php?v=10204723148630219
Malvin
Posts: 451
Joined: Sat Feb 27, 2010 12:50 am
Location: Pennsylvania

Re: 55+ on a SBC

Post by Malvin »

Nice Very nice now that is getting it done even with a hurt vacuum motor :) :)
Chad Speier
Posts: 139
Joined: Mon Jul 26, 2010 7:48 pm
Contact:

Re: 55+ on a SBC

Post by Chad Speier »

Another video!

Using the software for CSA..

This head is at 1.000.. Shows velocity and far right is CSA. At the beginning I'm at the opening and PR area.

This head measures 1.380 x 2.405 w/ .375 corner = 3.20in² calculated area

Measures at the PR 1.435 x 2.275 w/.375 corner = 3.14in² calculated area.

The CNC cad had the PR area at 3.16in²

https://www.facebook.com/video.php?v...type=2&theater
Chad Speier
Posts: 139
Joined: Mon Jul 26, 2010 7:48 pm
Contact:

Re: 55+ on a SBC

Post by Chad Speier »

Malvin wrote:Nice Very nice now that is getting it done even with a hurt vacuum motor :) :)
Agreed!
Malvin
Posts: 451
Joined: Sat Feb 27, 2010 12:50 am
Location: Pennsylvania

Re: 55+ on a SBC

Post by Malvin »

Chad
The link you posted
reads this below. Now I am not a member of Facebook maybe that's why I can not view it .

This content is currently unavailable
The page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page.
8ad-f85
Posts: 42
Joined: Sun Sep 28, 2014 10:21 pm

Re: 55+ on a SBC

Post by 8ad-f85 »

I'm on FB, same message.
jfholm
Posts: 1628
Joined: Fri Feb 19, 2010 7:36 pm
Location: Grantsville, Utah 45 min west of Salt Lake City

Re: 55+ on a SBC

Post by jfholm »

That one worked Chad. Interesting to watch!

John
Post Reply