Page 1 of 1

saenz S 250 flowbench instructions

Posted: Sat Sep 26, 2015 12:32 pm
by bmw202tii
hi, i hope someone here can help, i have recently purchased a used sanez S 250, but what i didnt get was a manual for it, ive emailed their US agent to no avail, i emailed sanez themselves and they were helpful to a point, in that they sent me a pdf on a manual, however it only goes upto page 18, apparently they dont have the rest of the manual because mine is an old machine??????

so im missing page 19 onwards which i could really do with can someone help please

thanks in advance graham

Re: saenz S 250 flowbench instructions

Posted: Sat Sep 26, 2015 11:22 pm
by Hotz
Hello welcome.
You ever tried here.

http://jamisonequipment.com/category-ca ... lowbenches

maybe they can have manual. :idea:

Re: saenz S 250 flowbench instructions

Posted: Sun Sep 27, 2015 3:14 am
by bmw202tii
ive emailed them twice no response so i guess not.

failing an instrcution manual i need to be able to work out how to check flow figures and calibration, manometers work correctely and i have the machines calibration plate. saenz sent me a table which shows max flow per orifice at 28", however if i cant check the calibration any figures i get could be way off

Re: saenz S 250 flowbench instructions

Posted: Mon Sep 28, 2015 7:45 am
by Brucepts
bmw202tii wrote:saenz sent me a table which shows max flow per orifice at 28", however if i cant check the calibration any figures i get could be way off
Time for a set of calibration plates ;)