saenz S 250 flowbench instructions

Orifice Style bench discussions
Post Reply
bmw202tii
Posts: 2
Joined: Sun Sep 06, 2015 12:22 pm

saenz S 250 flowbench instructions

Post by bmw202tii »

hi, i hope someone here can help, i have recently purchased a used sanez S 250, but what i didnt get was a manual for it, ive emailed their US agent to no avail, i emailed sanez themselves and they were helpful to a point, in that they sent me a pdf on a manual, however it only goes upto page 18, apparently they dont have the rest of the manual because mine is an old machine??????

so im missing page 19 onwards which i could really do with can someone help please

thanks in advance graham
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: saenz S 250 flowbench instructions

Post by Hotz »

Hello welcome.
You ever tried here.

http://jamisonequipment.com/category-ca ... lowbenches

maybe they can have manual. :idea:
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
bmw202tii
Posts: 2
Joined: Sun Sep 06, 2015 12:22 pm

Re: saenz S 250 flowbench instructions

Post by bmw202tii »

ive emailed them twice no response so i guess not.

failing an instrcution manual i need to be able to work out how to check flow figures and calibration, manometers work correctely and i have the machines calibration plate. saenz sent me a table which shows max flow per orifice at 28", however if i cant check the calibration any figures i get could be way off
Brucepts
Site Admin
Posts: 1851
Joined: Fri Jan 08, 2010 3:35 pm
Location: Pennsylvania
Contact:

Re: saenz S 250 flowbench instructions

Post by Brucepts »

bmw202tii wrote:saenz sent me a table which shows max flow per orifice at 28", however if i cant check the calibration any figures i get could be way off
Time for a set of calibration plates ;)
Bruce

Who . . . me? I stayed at a Holiday in Express . . .
Post Reply