John, flowed the plates

Orifice Style bench discussions
Post Reply
Chad Speier
Posts: 139
Joined: Mon Jul 26, 2010 7:48 pm
Contact:

John, flowed the plates

Post by Chad Speier »

John, I flowed the plates. Also can you get me some???

1.125 plate = 90.8 cfm @ .62 cd/ 89.0 cfm @ my formula
1.875 plate = 252.2 cfm @ .62 cd/ 247.2 cfm @ my formula
2.375 plate = 404.7 cfm @ .62 cd/ 396.6 cfm @ my formula

SuperFlow @ .590 cd/ manomter reading
#4 hole
1.125 plate = 92.6 electronics/ 88.5 manometer
1.875 plate = 252.3 electronics/ 245.9 manometer
#5 hole
1.125 plate = 93.2 eletronics/ 84.4 manometer
1.875 plate = 252.1 electronoics/ 243.1 manometer
2.375 plate = 396.8 electronics/ 387.4 manometer

PTS @ .590 cd
1.125 plate = 90.0
1.875 plate = 249.2
2.375 plate = 398.7

This falls right inline with what my feelings are. The manometer was scaled off a .60 cd and the calibration was done at a lower depression which I feel was 10"..
Last edited by Chad Speier on Mon Nov 28, 2011 4:46 pm, edited 1 time in total.
jfholm
Posts: 1628
Joined: Fri Feb 19, 2010 7:36 pm
Location: Grantsville, Utah 45 min west of Salt Lake City

Re: Jeff, flowed the plates

Post by jfholm »

Chad, this is John btw and I am surprised you received the orifice plates that fast. That is good to know. You can have those.

John
Chad Speier
Posts: 139
Joined: Mon Jul 26, 2010 7:48 pm
Contact:

Re: Jeff, flowed the plates

Post by Chad Speier »

jfholm wrote:Chad, this is John btw and I am surprised you received the orifice plates that fast. That is good to know. You can have those.

John

Sweet! Thanks!

PS, I changed it! :)
jfholm
Posts: 1628
Joined: Fri Feb 19, 2010 7:36 pm
Location: Grantsville, Utah 45 min west of Salt Lake City

Re: John, flowed the plates

Post by jfholm »

Just don't call me late for dinner ;)
Post Reply