Re: Manometer advice
Posted: Thu Jan 08, 2015 6:28 pm
Slufkin, that marvel is your issue.
Its a mix of different density of fluids, that will for sure separate to some extent, especially when the solvent part will vapor after some time.
it will act as i described.
Try with pure water as suggested.
from wikipedia
The product is composed of 74 percent mineral oil, 25 percent stoddard solvent, and 1 percent lard.[1]
o-Dichlorobenzene (1,2-Dichlorobenzene (ortho-dichlorobenzene))0 – 5% , Fine White Mineral Oil 70 – 100% , Mineral Spirits 20 – 30% [2]
/kimi
Its a mix of different density of fluids, that will for sure separate to some extent, especially when the solvent part will vapor after some time.
it will act as i described.
Try with pure water as suggested.
from wikipedia
The product is composed of 74 percent mineral oil, 25 percent stoddard solvent, and 1 percent lard.[1]
o-Dichlorobenzene (1,2-Dichlorobenzene (ortho-dichlorobenzene))0 – 5% , Fine White Mineral Oil 70 – 100% , Mineral Spirits 20 – 30% [2]
/kimi