![Image](http://i280.photobucket.com/albums/kk172/coulterracn/Shop/Siouxvalvefacer001.jpg)
Valve and seat grinding equipment
-
- Posts: 450
- Joined: Wed Feb 24, 2010 5:44 am
- Location: Mississippi Gulf Coast
- Contact:
Re: Valve and seat grinding equipment
I think mine might be a Model 6024, I'll have to check. Here is a picture for reference. Doesn't get used much.
![Image](http://i280.photobucket.com/albums/kk172/coulterracn/Shop/Siouxvalvefacer001.jpg)
![Image](http://i280.photobucket.com/albums/kk172/coulterracn/Shop/Siouxvalvefacer001.jpg)
My Flowbench is better than their's
-
- Posts: 78
- Joined: Tue Feb 21, 2012 6:30 pm
Re: Valve and seat grinding equipment
Hi Eagle Eye There are two set ups that I am looking at they are a bit of a drive away (5 to 6 hours) but what the heck. One of them is a 6024 and is in extremely good condition , it doesn't look like there is a scratch on it for 1000.00 The other is a 645 and it looks like it just came out of a machine shop (used cond.) and it is 500.00. Decisions, decisions Whats a guy to do? By the way both of the valve grinders look very similar, the 645 has a built in motor cover and two oil cooling lines. The 6024 has the grinder motor exposed and one flexible oil line. They both appear to be of similar age although I doubt they are. Quartermaster
-
- Posts: 63
- Joined: Tue Aug 07, 2012 3:27 am
Re: Valve and seat grinding equipment
Both those prices sound in the reasonable range. You should consider the tooling as well. The valve grinder is less than half of the job. The seat tooling is very important as well. Consider the size, quantity, and quality of the pilots, and stones as well, as that stuff really adds up if you plan to do a variety of work.
If you are a racer, that just wants to do your own stuff, then you'd likely buy one or two new pilots for your application, as well as specific stones. You'd like to own at least 3 stone holders, and one of those
(your 45) should be in mint condition.
Darcy
If you are a racer, that just wants to do your own stuff, then you'd likely buy one or two new pilots for your application, as well as specific stones. You'd like to own at least 3 stone holders, and one of those
(your 45) should be in mint condition.
Darcy
-
- Posts: 78
- Joined: Tue Feb 21, 2012 6:30 pm
Re: Valve and seat grinding equipment
Hi Guys Just a clarification... the prices I mentioned is for a valve grinder, seat grinder wth some pilots, stones and stone dressers. Supposed to be complete setups in both cases. Quartermaster
-
- Site Admin
- Posts: 1852
- Joined: Fri Jan 08, 2010 3:35 pm
- Location: Pennsylvania
- Contact:
Re: Valve and seat grinding equipment
I just looked at mine and it's a 655 and I have a B&D seat grinding set . . . paid $200 for the set around ~15 years ago
Bruce
Who . . . me? I stayed at a Holiday in Express . . .
Who . . . me? I stayed at a Holiday in Express . . .
-
- Posts: 1628
- Joined: Fri Feb 19, 2010 7:36 pm
- Location: Grantsville, Utah 45 min west of Salt Lake City
Re: Valve and seat grinding equipment
This place seems to be very reasonable for parts as in stone prices, pilots, stone holders etc. They seem very reasonable.
http://www.beamequipment.com/
John
http://www.beamequipment.com/
John