PTS Flowbench Forum

Posted: **Thu Oct 01, 2015 9:44 pm**

Found this site and plan on sticking around for awhile.

As you can tell by my user handle I am a machinist/millwright and have been for longer than I care to admit. My experience is pretty broad from everyday household fixes to repairing critical equipment in nuclear powerhouses. But the main reason for being here is to build a flowbench to get back into playing with bikes and four wheeler's like I used to.

Hopefully I will have so good input here.

Mike

Posted: **Fri Oct 02, 2015 6:54 pm**

Welcome to the Forum Mike.

You are definitely among like minded people here, we even have a few odd crazy biker guys here.
Plenty to talk about and share, this must be about the most friendly site anywhere on the Internet.

Posted: **Fri Oct 02, 2015 8:36 pm**

Tony wrote:Welcome to the Forum Mike.

You are definitely among like minded people here, we even have a few odd crazy biker guys here.
Plenty to talk about and share, this must be about the most friendly site anywhere on the Internet.

What Tony said

Posted: **Sat Oct 03, 2015 11:51 am**

Hello Mike ..
Welcome, nice to have another guy motorcycles here .. A lot of good this forum for a guy DIY Flow Bench.
Summing up the best place ..

Posted: **Sat Oct 03, 2015 5:58 pm**

Welcome Mike.

Jim

PTS Flowbench Forum

yep another FNG.

yep another FNG.

Re: yep another FNG.

Re: yep another FNG.

Re: yep another FNG.

Re: yep another FNG.