PTS Flowbench Forum

so while i waited for the cave floor to dry i got flangey wiv it.



firstly i ported out the turbine inlet..












then got some old manky flame cut 1/2 " plate ..






made the adaptor plate from turbo to 4"downpipe.




and the huge holset hc3 flange to the t3 flange adaptor cut out .





then sanded and spiffed up the housing .







regards
robert

https://youtu.be/igkbS-RUBzk


little video i made of the fb testing.

testing.

https://youtu.be/ShJViK_3_A8