PTS Flowbench Forum

Has anybody placed a small , say computer fan in with with the fan power source to aid cooling , or is this not even an issue

also any links to manometer's diy or resale

Cheers

Yes i did on mine it circulates air up from the bottom and out the top you can see the grate i made from the side at the top i think picture 2.

Rick

My bench summary http://www.flowbenchtech.com/forum/view ... ?f=8&t=565

I can't even look at my bench anymore after seeing how nice that one is.

Thank you, it's funny but i walk past it in the shop and use it and i forget the project and the work that went into it now i'm trying to get my ass in gear and build another one with more motors in the same box size .

Rick

GUNT wrote:Has anybody placed a small , say computer fan in with with the fan power source to aid cooling , or is this not even an issue

also any links to manometer's diy or resale

Cheers

Do you mean analog (water/oil) or digital?

Rick

water or oil , i have the digital , but would also like the visual conformation too

On the right side of the electronic bay I made two big holes, one at the bottom, one at the top and inside I installed two computer fans. The bottom fan draws air in and the top one draws it out. It's over kill as nothing ever gets hot in there. Ron

My SCR power regulator from China (substitutes the SSR sold by Bruce) has a huge heat sink and came with a 4in ~ 5in 220v fan (is almost the same used in PCs) and a simple thermoswitch that goes over the heat sink (This type. At a given termperature it closes electrical contact and the fan starts.

As I did cut my cabinet in CNC, I made a grill on the side panel right in front of the fan.

Actually it would be better with two grils (one at the top and one at the front of the fan) to gets better air circulation.