Re: 240volt motors and SSR issues
Posted: Thu Feb 15, 2024 12:58 am
My running theory was to run 3 of the kemo modules, each running 2 motors. Which should see them kept at 11A max per module. All just ideas at this stage and i am glad for the time you have taken replying so far.
I assume by small circuitboard to attach to the ssr from Farnell/element14, you are talking about a phase angle control board? Forgive the questions, this is all learning for me and i am trying to absorb it all.
I found this while browsing today, aside from the amp rating being too low, would something like this work?
https://nz.rs-online.com/web/p/thyristors/2329353?gb=s
The help is much appreciated.
I assume by small circuitboard to attach to the ssr from Farnell/element14, you are talking about a phase angle control board? Forgive the questions, this is all learning for me and i am trying to absorb it all.
I found this while browsing today, aside from the amp rating being too low, would something like this work?
https://nz.rs-online.com/web/p/thyristors/2329353?gb=s
The help is much appreciated.