Pic's from my new job

A place to talk about things that do not fit into any other forum, only members may post to keep out the SPAM
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Pic's from my new job

Post by Flash »

Just some pictures i thing you guys will like ;)


This is the building i'm working in and have been for the past 3 months
Image
This is what it looks like in side. Notice that big conection rod!!!
Image
Or how about this large 4 throw crank shaft. If you notice my boot at the left of the pic you will get and idea of the size.
Image
Maybe my hand will show the size of it.
Image
This is before the actual compressor ends are bolted on
Image

we have a 10 ton crane that strugles to lift the 2nt stage compressor cylinder
Image

This has been a lot of fun so far but the learning curve....wow!
Gordon
blaktopr
Posts: 622
Joined: Sat Feb 20, 2010 9:27 pm
Location: Central NJ
Contact:

Re: Pic's from my new job

Post by blaktopr »

I thought this was your stroker engine from the other thread.:D
Chris Sikorski
Chris@wetflowtech.com
Totallywirednow.com
Hotz
Posts: 709
Joined: Thu Feb 25, 2010 10:37 pm

Re: Pic's from my new job

Post by Hotz »

The small boxes **White**
are the connecting rod or rings ... :D :D

what is its function in new work..

Equipment repair or new product?
Sorry my english mistakes.
PTS Parts>> http://www.flowbenchtech.com/store.html
Jens.J
Posts: 3
Joined: Sun Dec 11, 2011 7:23 am
Location: Sweden

Re: Pic's from my new job

Post by Jens.J »

Building a new powerstation?
jfholm
Posts: 1628
Joined: Fri Feb 19, 2010 7:36 pm
Location: Grantsville, Utah 45 min west of Salt Lake City

Re: Pic's from my new job

Post by jfholm »

Way cool Gordon! I envy you. I would love that job.

John
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Pic's from my new job

Post by Flash »

blaktopr wrote:I thought this was your stroker engine from the other thread.:D
I sure hope not, The crank alone would smash my car below ground surface!!!!! :lol:
Each unit, has 4 compressors and there are 4 units in that building. and to top it off, the semi driver could only bring 2 compressor per flat bed due to weight!
Gordon
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Pic's from my new job

Post by Flash »

Hotz wrote:The small boxes **White**
are the connecting rod or rings ... :D :D

what is its function in new work..

Equipment repair or new product?
Rebuilding old out dated compressors with updated parts.

These are Natural Gas Compressors. back in the 1980's they were used to pull the gas from the ground to sell. once the gas was depleted they were shut down. A company bought the plant and are paying us to rebuild then so they can smash/compress gas for storage.

The white boxes are lint free rage we use to clean part before installing, like crank and rod bearings.
Gordon
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Pic's from my new job

Post by Flash »

jfholm wrote:Way cool Gordon! I envy you. I would love that job.

John
I really am injoying my new job. it's long hours, working in the eliments and years of learning, before i know what i'm taking about. :P
Gordon
Malvin
Posts: 451
Joined: Sat Feb 27, 2010 12:50 am
Location: Pennsylvania

Re: Pic's from my new job

Post by Malvin »

That is Awesome Flash wish you the very best with your New job :)

Enjoying your work is the best then it does not feel like work at all :)
Flash
Posts: 773
Joined: Thu Feb 25, 2010 3:39 pm

Re: Pic's from my new job

Post by Flash »

Malvin wrote:That is Awesome Flash wish you the very best with your New job :)

Enjoying your work is the best then it does not feel like work at all :)
Malvin, Glad to see your still lurking around :P
Gordon
Post Reply