| Gun Fighter 1075cc Motor | Price | Vendor | Part # | | Parts & Services listed here are for our Gun Fighter 1075cc Motor. | | | | | | | |
| Crank Parts & Services | | | | |  | | | |
| Install Big Pin, Thrush Bearing, Index, Weld Crankshaft | 680.00 | Schnitz | PEAR1007 | | Our Mid Size Hard Core Package | | |
| | | | ![Text Box: This is the Ultimate Street 1075 package with Top of the Line Components
required to meet the Increased Horsepower produced by this engine package.
You get all the upgrade components of the Sport Tour 1075 plus we've
taken the porting to the next level [ 25% averrage increase over stock ]
with backcut, stock size stainless steel valves.
Based on a Rock Solid Big Pin Crankshaft, Heavy Duty Undercut
Transmission, Clutch Basket, New Shift Forks, Shift Shaft,
Needle Bearing Pusher, New Pushrod & Overshift Bushing.
The internal components are designed to hold up to the increased
power this engine package will produce.
Heavy Duty Main Bearing Studs and Cylinder Studs with New Heavy Duty Head Nuts are installed. The Center Main Bearing Cap is milled and receives a Heavy Duty Support Plate. The Clutch receives new metal and fiber plates with Heavy Duty Springs.
The Cylinderhead gets our Street Cut Porting with 3 Angle Valve job, Heavy Duty Valve Springs and is resurfaced. Complete with Performance Cams.
All Camchain related rollers and idlers are replaced and a new Heavy Duty Tsubaki Cam Chain is installed. New Billet Cam Sprockets are installed and the camshafts are degreed in.
This one is for the sport oriented rider that appreciates the excitement of a truly remarkable midsize engine. If the grin factor is what you're after this is the answer!](image012.gif) | | | | |
| APE Main Bearing Studs | 49.67 | Z1 | APMBS1000K | | | | | | |
| APE Main Bearing Cap | 23.35 | APE | 99285 | | | | | | |
| Transmission Parts & Services | | | | | | | | | |
| APE Heavy Duty Second Gear Input | 149.65 | APE | 1000-521 | | | | | | |
| APE Heavy Duty Second Gear Output | 239.95 | APE | 1000-520 | | | | | | |
| APE Super HD Trans Mission Bearing | 29.92 | APE | HDB11305 | | | | | | |
| APE HD Shift Shaft | 29.95 | APE | BRO1006 | | | | | | |
| Undercut Trans One Side | 264.00 | APE | LC55-1 | | | | | | |
| Heavy Duty 4th/5th Liska Shift Fork | 167.70 | Z1 | LIZ1SF | | | | | | |
| Countershaft Lock Washer | 2.95 | Schnitz | 92200-1065 | | | | | | |
| Overshift Bushing | 10.00 | Schnitz | 99270 | | | | | | |
| Small Shift Fork [2[ | 157.74 | Schnitz | 13140-045 | | | | | | |
| Transmission Bearing Cap O Ring | 1.22 | Schnitz | 670B1507 | | | | | | |
| Clutch Related Parts | | | | | | | | | |
| APE HD Clutch Basket Kit | 65.00 | APE | CHK1000K | | | | | | |
| APE Needle Bearing Clutch Pusher | 27.50 | APE | KCB900 | | | | | | |
| Clutch Pushrod | 13.34 | Z1 | 13116-021 | | | | | | |
| APE Clutch Pack w/ springs | 97.44 | Z1 | APCK900 | | | | | | |
| OEM Steel Clutch Plates [7] | 69.65 | Schnitz | 13089-022 | | | | | | |
| Cam Chain Related Parts | | | | | | | | | |
| APE Cylinder Studs | 77.31 | Z1 | APCS900K | | | | | | |
| APE Cylinder Head Nuts | 64.78 | Z1 | APCHN1000K | | | | | | |
| APE Cam Sprockets [32T] | 47.78 | Z1 | APACS1000K | | | | | | |
| Cam Chain Top Idler | 111.59 | Z1 | 12053-1016 | | | | | | |
| Cam Chain Lower Idler [2] | 23.18 | Z1 | 12057-002 | | | | | | |
| Cam Chain Roller | 13.09 | Z1 | 12055-002 | | | | | | |
| Cam Chain Tensioner Internal | 51.71 | Z1 | 12048-001 | | | | | | |
| Cam Chain Idler Shaft -Top [2] | 21.08 | Z1 | 12052-005 | | | | | | |
| Cam Chail Idler Shaft - Lower [1] | 6.30 | Z1 | 12052-003 | | | | | | |
| Top Idler Billet Spacers | 64.95 | Schnitz | Z1BL1000 | | | | | | |
| | | | | | | | | |
| Cam Chain Center Idler Shaft Damper [2] | 5.25 | Z1 | 92075-123 | | | | | | |
| Cam Chain Idler Shaft Damper [4] | 7.08 | Z1 | 92075-232 | | | | | | |
| APE Cam Chain Tensioner | 50.35 | Z1 | APKT1000 | | | | | | |
| Cam Chain Guide [cyl.block] | 13.09 | Z1 | PM72-065 | | | | | | |
| Cam End Plugs [4] | 29.24 | Z1 | SU620-990 | | | | | | |
| Tsubaki Cam Chain [124P] | 40.79 | Z1 | TU25-9724 | | | | | | |
| Cam Chain Guide -Main Cap | 14.95 | Schnitz | MCG | | | | | | |
| Head Related Parts | | | | | | | | | |
| Exhaust Gaskets [4] | 8.08 | Z1 | KL16-5975 | | | | | | |
| Stainless Steel Intake Valves 36mm | 98.00 | APE | 984180 | | | | | | |
| Stainless Steel Exhaust Valves 30mm | 98.00 | APE | 984183 | | | | | | |
| Carb Holders [4] 34mm | 59.80 | Z1 | KL11-4811 | | | | | | |
| Copper Head Washers [4] | 14.60 | Schnitz | 92022-215 | | | | | | |
| APE Valve Guide Set | 56.10 | APE | VGK900 | | | | | | |
| APE Valve Seals | 18.95 | APE | 91999 | | | | | | |
| APE Valve Keepers | 16.95 | APE | 21-604 | | | | | | |
| APE Billet Cam Cover Caps | 51.43 | APE | KCK-1100 | | | | | | |
| Cam Bearing Set [16] | 126.95 | Schnitz | 13034-030-16 | | | | | | |
| APE Street Engine Combo Kit | | | | | | | | | |
| APE SSR 1075 Piston Kit with K410 Cams & Valve Springs | 842.06 | APE | SSR1075 | | | | | | |
| | | | | | | | |
| | | | | | | | | |
| Misc Engine Parts | | | | | | | | | |
| Gasket Set | 61.35 | Z1 | SU608-619 | | | | | | |
| Allen Bolt Set | 30.45 | Z1 | NGJ1-JA1 | | | | | | |
| Base Gasket | 10.44 | Z1 | COC8093 | | | | | | |
| Seal Kit | 21.63 | Z1 | KL15-8173 | | | | | | |
| Oil Filter | | | | | | | | | |
| Dowel - Case to Cylinder [2] | 1.72 | Schnitz | 92043-1266 | | | | | | |
| Dowel - Head to Cylinder [2] | 1.92 | Schnitz | 92043-1037 | | | | | | |
| Oil Pan Gate | | Schnitz | | | | | | | |
| Igniton Cover Seal | 9.89 | Schnitz | 92050-047 | | | | | | |
| 18mm Oil Passage O Ring | 1.80 | Schnitz | 670B2018 | | | | | | |
| Transmission Shaft O Ring | 1.82 | Schnitz | 92055-035 | | | | | | |
| Breather O Ring | 5.20 | Schnitz | 92055-052 | | | | | | |
| Oil Pan Gate | 19.95 | Schnitz | K339 | | | | | | |
| Oil Filter Cover O Ring | 9.00 | Schnitz | 671B25105 | | | | | | |
| Oil Filter Cover Drain Plug O Ring | 0.79 | Schnitz | 670B1508 | | | | | | |
| Oil Fill Cap O Ring | 1.95 | Schnitz | 92055-049 | | | | | | |
| NGK B8ES Spark Plug [4] | 9.00 | Z1 | TU38-0019 | | | | | | |
| Counter Shaft Cover Seal | 6.77 | Schnitz | 92050-024 | | | | | | |
| CRH Services Labor | | | | | | | | | |
| KZ Stage1 Hard Core Street Porting | 750.00 | CRH | | | | | | | |
| Teardown & Assemble w/listed parts | 500.00 | CRH | | | | | | | |
| Labor to Install HD Clutch Basket Kit | 75.00 | CRH | | | | | | | |
| Bore & Hone Cylinders / Prep Block | 160.00 | CRH | | | | | | | |
| Surface Block | 30.00 | CRH | | | | | | | |
| Blasting & Cleaning | 200.00 | CRH | | | | | | | |
| Polish Engine Covers | 200.00 | CRH | | | | | | | |
| Mill Main Bearing Cap | 10.00 | CRH | | | | | | | |
| | | | | | | | | |
| Totals | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| Total Estimate Price | 6231.15 | | | | | | | | |
| Does Not Include Shipping Charges | | | | | | | | | |
| | | | | | | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
| | | | | | | | | | | | | | | | | | |